3G Industrial Index - Preface INDEX PREFACE ................................. II ENVIRONMENTAL CONDITIONS ........................II CLEANING INFORMATION ..........................II SHOCKS OR VIBRATIONS ..........................II BACKUP BATTERY (OPTIONAL) ........................II DECLARATION CE OF CONFORMITY ......................II ASSISTANCE AND CONTACTS ........................II Restriction of use of Wireless Radio Equipment using the 2.4GHz ISM frequency band ......III SAFETY WARNINGS ............................IV...
OF CONFORMITY We, Digicom S.p.A., with registered office at Cardano al Campo (VA - Italy) - Via Volta 39, declare under our sole responsibility, that the products named 3G Industrial to which this declaration refers to, satisfy the essential requirements of following Directive: - 1999/5/CE 9th March 1999, R&TTE (concerning radio equipment and telecommunication terminal equipment and the...
3G Industrial Index - Preface REstRIctIoN of usE of WIRElEss RaDIo EquIpmENt usINg thE 2.4ghz Ism fREquENcy baND This equipment complies with european standards in matter of electromagnetic compatibility, interference and safety. This equipment operates in the 2.4GHz Wireless radio bandwidth, regulated by the European 1999/5/CE Directive. It can be freely used in those countries which are not specifically applying restrictions.
3G Industrial Index - Preface SAFETY WARNINGS Read these instructions and norms carefully before powering the device. Violation of such norms may be illegal and cause hazard situations. For any of the described situations please refer to the specific instructions and norms.
For the description of all the configuration parameters please refer to the User's Guide available at www.digicom.it 1.1. DESCRIPTION 3G Gateway identifies a range of Digicom 3G routers: 3G SoHo, 3G SoHo PLUS, 3G BackUP, 3G Corporate, 3G WLL and 3G Industrial.
No device connected on the Ethernet port Computer, switch or other network device correctly connected to the LAN port 1.4. PARTS CHECK The package will contain the following items: • 3G Industrial • Power adapter • 2 Wi-Fi antennas • GSM antenna •...
1. Power 3G Industrial off then connect the Wi-Fi antenna and the GSM antenna. 2. Insert the SIM (we recommend to disable the PIN). 3. Connect the power supply and power 3G Industrial on. ATTENTION: For a correct installation connect 3G Industrial to a ground electrode through the proper clamp.
Page 10
Power Supply To configure 3G Industrial and/or surf the internet, connect the computer through the LAN port. If more than one device must be connected, use an external switch. To use the WiFi, simply enable this option in the configuration web pages.
• Device must be powered off. Screw on both sides (4 screws) as shown in the picture • Open 3G Industrial and place the battery as shown. Use a biadhesive tape to fix it to the case. • The same picture shows how to insert the connector in the card: •...
• Disable the PIN request on the SIM (through a cellular phone). • Insert the PIN in the 3G Industrial configuration. At power on, the device will send the PIN to the SIM. • 3G Industrial will show the PIN request through the fast blinking of 3G led (red).
• A laptop or PC connected to the LAN port on the device. To enter the configuration menu you must set on the computer an IP address of the same LAN of 3G Industrial; you can set the address statically or using the assignment through the DHCP Server.
(for some operators the APN is sufficient). • Define the connection mode: Always on: 3G Industrial will enable 3G connection at power on. If some disconnections should occur, the Gateway will try to restore them automatically. Manually: In this mode the user manually decides when the connection must be enabled and for how long. To enable (connect) andd disable (disconnect) 3G connection, use the push buttons in the Home page.
Page 15
• If the ethernet card of the computer connected to 3G Industrial is set to DHCP mode, 3G Industrial will appropriately configure the IP addresses and you will be able to start surfing. • If the ethernet card is configured with static IP addresses, check that the preset Gateway address is the one of 3G Industrial.
3G Industrial Home 4. HOME • The Home menu has various options that allow to verify the device status. • The Home and Status pages display the device overview:...