2G Lift Dialer
2.8.
Voice BoX - car Pinout (code 8d5804)
PIN
DESCRIPTION
1
LIFT DIALER
2
LIFT DIALER
3
EXTERNAL ALARM BUTTON IN TOP and/or PIT (N.O. or N.C.)
4
EXTERNAL ALARM BUTTON IN CAR (N.O. or N.C.)
5
HEARING LOOP ( - )
6
HEARING LOOP ( + )
7
EXTERNAL LED: ALARM SENT (YELLOW LIGHT)
8
EXTERNAL LED: ALARM RECEIVED (GREEN LIGHT)
9
GND FOR EXTERNAL LEDS
10
CAR2
11
GND FOR EXTERNAL ALARM BUTTON AND FOR SELECTION CAR2/CAR3
12
CAR3
For a good audio quality we suggest the use of a twisted pair for the connection.
Otherwise it is possible:
- to use two unused wires already present in the cabin cable;
- to use the two wires already present that are used for the bell, after having modified the system as described in paragraph
RELAY1: BELL MANAGEMENT.
In these cases the audio quality could not be so good.
The buttons installed on Top or in Pit, for technical people, can be N.O. or N.C. It is necessary that both buttons have the
same configuration: both N.O. or both N.C.
2.9.
Voice BoX - car toPograPhy (code 8d5804)
FIXING HOLES
ALARM SENT LED
2.12
RESET
BUTTON
SPEAKERPHONE
MICROPHONE
1
ALARM
RECEIVED LED
SCREW TERMINAL
12
Installation