2G Lift Dialer
1.2.
SYSTEM DESCRIPTION AND PACKAGE CONTENT
Digicom Emergency phone for lift system is composed by two main elements:
2G Lift Dialer
Remote alarm dialer with native integrated GSM/GPRS module.
Voice Box
Speakerphone unit with integrated microphone and speaker.
Voice Box speakerphone unit is connected to 2G Lift Dialer Emergency phone with 2 wires only.
For a good audio quality we suggest the use of a twisted pair for the connection.
Otherwise it is possible:
- to use two unused wires already present in the cabin cable;
- to use the two wires already present that are used for the bell, after having modified the system as described in paragraph
RELAYS1: BELL MANAGEMENT.
In these cases the audio quality could not be so good.
2G Lift Dialer remote alarm dialer is available in the following versions:
Emergency phone on DIN guide support (code 8D5778)
Suggested for installations inside the frame controller.
It is supplied with:
• GSM antenna with magnetic base and 3 meters cable.
Accessories that can be purchased separately:
• external power supply 230Vac / 12Vdc – 1000mA (code 8D6065);
• rechargeable battery Li-Pol 3,7Vdc – 3800mAh (code 7D1991).
Emergency phone integrated in metal box (code 8D5798)
Suggested for installations in the machine room.
It is supplied with:
• GSM antenna with magnetic base and 3 meters cable;
• external power supply 230Vac / 12Vdc – 1000mA;
• rechargeable internal battery Li-Pol 3,7Vdc – 3800 mAh;
• screws for wall mounting.
1.2
Introduction