Hardware Installation - Digicom Wireless 3G Gateway User Manual

3G Gateway Series

2. HARDWARE INSTALLATION

Just three steps to operate with 3G Gateway:
1. Connect the GSM antenna and the WiFi antenna (the pictures show two different models).
2. Insert the SIM (we recommend to disable the PIN). For a correct operation turn 3G Gateway off.
3. Connect the power supply and turn 3G Gateway on.
Now you can connect a phone to the connector Tel 1 and you will be able to make and receive calls. (Function not supported by
3G BackUP).
SIM 1
Hardware Installation
SIM 2
2.1