Srx-Sl Wireless Headset Specifications; Battery Specifications; Supported Bluetooth Profiles; Srx-Sl Compatibility - Honeywell SRX-SL User Manual

For use with devices running a microsoft windows 10 mobile operating system
Hide thumbs Also See for SRX-SL:
Table of Contents

Advertisement

Use Case
USB plugged in
USB plugged in
USB plugged in

SRX-SL Wireless Headset Specifications

Weight
Operating temperature
Storage temperature
Charging Temperature
Drop Tested
Humidity
Noise Reduction Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total shipment weight.

Battery Specifications

The battery is not user-serviceable. The specifications below are for a new battery.
Capacity
Run Time
Charge Time
Charging Temperature
Note: If the battery requires replacement, contact

Supported Bluetooth Profiles

The SRX-SL headset supports:
• HFP (Hands-Free Profile) version 1.6.
• HSP (Headset Profile) 1.2 for backwards compatibility.
• A2DP (Advanced Audio Distribution Profile) version 1.3.

SRX-SL Compatibility

The SRX-SL headset has been designed for use with the following devices:
• Honeywell Dolphin 75e and Dolphin CT50.
1 - 4
SRX-SL State
USB not Charging,
Bluetooth disabled
Headset detects fault while
charging
Device firmware update
2.82 ounces (80g)
32°F to 122°F (0°C to 50°C)
-4°F to 158°F (-20° to 70°C)
Normal charging: 32°F to 104°F (0°C to 40°C)
Fast Charging: 32°F to 95°F (0°C to 35°C)
24 drops from 6 feet (1.83 m) at minimum and maximum operating tempera-
tures
95% relative humidity, non-condensing
Not applicable
250mAh
HFP use case: minimum 8 hours at
SRCOMM use case: minimum 8 hours at
Fully charged in 3 hours at 23
Fast charge to 75% capacity in less than 1 hour
Note: For details, refer to
Normal charging: 32°F to 104°F (0°C to 40°C)
Fast Charging: 32°F to 95°F (0°C to 35°C)
Customer Support
LED
Off (cable not connected to
charger, cable connected
to PC that is in Sleep
mode)
Flashing Red - one sec-
ond on, one second off
See
Charging Fault
page 2-2)
Starts solid green or red
depending on charger
state, goes off during firm-
ware update, and back to
solid red or green when fin-
ished.
0°C to 50°C
23°C.
°C
Fast Charge
(see page 2-2).
(see page 3-1) for information.
Tones
(see

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents