Replacing An Earpad On The Srx3 Hard-Hat Or High-Noise Headset - Honeywell SRX3 User Manual

Replacing an Earpad on the SRX3 Hard-Hat
or High-Noise Headset
1. Remove the electronics module from the earcup.
2. Pry the earcup apart by grasping the inside and outside sections of the
3. Remove the worn foam earpad from the inside plate.
29
NOTE
The high-noise headset has microphone cap storage located on the
l
headband and above the headset earcup.
A stability strap is available for this model.
l
earcup and pulling the two sections apart.
SRX3 User Guide - Preliminary