About Pairing Wireless Headsets; Pairing Versus Connecting; Pairing-Related Configuration Parameters - Honeywell SRX3 User Manual

Honeywell products, and their default options, have been measured and
qualified to ensure audio safety for common work flows and for the general
population. The default audio parameters should not be changed without
explicit direction from a qualified audio professional.

About Pairing Wireless Headsets

Pairing is the process in which two devices enabled with Bluetooth wireless
technology create a secure link in order to share information. The pairing
process begins when the master device initiates an inquiry to search for
discoverable Bluetooth addresses.
Vocollect wireless headset pairings with Talkman or other devices are initiated
by the device and remain paired until broken by user action. Note that the
pairing exists between the headset and device hardware. If the operator moves
to a different device, the original headset/device pairing will not follow that
operator.
The automatic operator load feature is an exception to the hardware-only
pairing. On supported platforms, when an operator connects to a Vocollect
wireless headset, that connection and operator information are registered in
VoiceConsole. The next time the operator connects to that headset, his or her
information will be loaded automatically. See the automatic operator load
documentation for your Vocollect Voice Software release.

Pairing versus Connecting

Pairing is not the same as connecting. Two Bluetooth devices, once paired, can
connect and disconnect many times. With a pairing in memory, the two devices
can reconnect easily and will make repeated attempts to establish a connection.
In this way, a headset and device pairing allows for increased user mobility.
For example, if the user takes the headset out of range of the paired device or
powers it off, the device will notice the connection loss and try to reconnect. The
two remain paired throughout this process.

Pairing-related Configuration Parameters

PersistSrxPairingAcrossPowerCycle
Set to 0 for the device to delete the pairing when it is powered off.
When the device is powered on again, it will not reestablish this connection with
the associated headset.
31
qualified audiologist. Changing these settings without qualified medical
supervision could result in additional hearding damage.
SRX3 User Guide - Preliminary