Headset Battery Charger; Headset Battery Charger Wall Mount; Mounting The Headset Battery Chargers - Honeywell SRX3 User Manual

Headset Battery Charger

l
l
l

Headset Battery Charger Wall Mount

This unit provides a convenient surface for mounting the headset battery
charger and its associated power supply on a wall.
l
l
l
l
l
l

Mounting the Headset Battery Chargers

You will need:
l
SRX3 User Guide - Preliminary
The headset battery charger is available in a five-bay model with five battery
slots and a single battery charger with one battery slot.
To power on the charger, connect the power supply to the charger and a
power source. The LED indicator in the left corner of the charger is green
when the charger is receiving power.
Headset battery chargers are designed to be placed on a desktop or
mounted on a wall using a wall mount kit.
Customer assembly required.
Customer assumes all responsibility for the installation of these units.
Avoid potential hazards (electrical wires, waterlines, and similar building
components) when drilling into the wall.
Avoid blocking power outlets and other wall receptacles when installing the
charger.
Anchoring a wall mount to a wall stud generally results in a more stable
installation. If you drill into a wall stud, do not use a screw anchor in that
hole.
Anchors must be at least 12 in. (30.48 cm.) from the floor to allow for proper
attachment, seating, and removal of the charger unit.
DIN rail, slotted steel 35 mm X 15 mm, Honeywell Part #CM-1000-20-101
or customer-supplied DIN rail meeting the following specifications:
46