Chapter 4 - Chargers - Honeywell SRX3 User Manual

CHAPTER
CHARGERS
4
NOTE
The SRX3 headset batteries are charged with the SRX2 battery charger
Honeywell offers charger units that can charge one or more batteries
individually or while inserted in Talkman devices.
Talkman devices should be placed into a charger when not in use. The charger
charges the device's battery while linking to the host computer to download
new voice applications, reconfigure device settings, and update device software.
CAUTION
l
l
NOTE
l
l
l
l
45
Keep water and moisture away from the charger at all times. If a battery
has any condensation from use in a cold environment such as a freezer,
dry the battery before placing it into the charger.
Only Honeywell-approved batteries should be placed in the battery
charger. Do not attempt to charge any other type of battery in the
charger.
Do not place a device into a charger without a battery attached to it.
A device is always on when it is in a charger. When a device that is
powered off is placed into a charger, it automatically turns on.
The A700 series, A500/T5, and T1 chargers can charge batteries both
inserted in and separate from devices.
Honeywell recommends that a protective device, such as an
uninterruptible power supply with surge protection and lightning
arrestor capability, be used with battery chargers.
SRX3 User Guide - Preliminary