Pairing An Srx3 Headset; Pairing An Srx3 Headset With An A700 Device Using Touchconnect - Honeywell SRX3 User Manual

Pairing
Information About this Pairing Method
Method
pairing, as the user is performing the pairing procedure away from other users. Also,
once a manual pairing is made (assuming no other configuration parameters have
been changed), the pairing will persist and that device and headset will stay paired
until the pairing is explicitly cleared.
VoiceConsole
The user pairs a specific device to a headset via the VoiceConsole interface.
pairing:
Screen-Based See Screen-Based Pairing information in this chapter for details on pairing handheld
pairing: devices to a headset.

Pairing an SRX3 Headset

The SRX3 Wireless Headset makes pairing and connecting even easier:
Pairing an SRX3 Headset with an A700
Device Using TouchConnect™
The A700 device can use TouchConnect to connect to an SRX3 Wireless
Headset when:
l
l
l
l
l
l
For best performance when using an SRX3 headset with a Talkman A700
device, use the latest SRX3 software version. Obtain the latest headset software
from your Honeywell portal or reseller and use the Honeywell Accessory Update
Utility to upgrade your SRX3 headset.
SRX3 User Guide - Preliminary
It automatically enters low power pairing mode when it is
l
turned on.
It can break and re-enter pairing modes from a powered-
l
on state.
No headset reboot is necessary.
l
It accepts connections from any device that was previously
l
paired to it.
the A700 device is running VoiceCatalyst
Bluetooth is enabled
the device is sleeping (not running a task)
a wired headset is not attached or a wireless headset is not actively
connected to the device
the parameter SRXHeadsetEnable is set to 1 (Enabled), the default
the parameter SrxAutoPairEnable is set to 0 (Disabled), the default
34