Completing the Assembly
To complete the assembly, complete the following steps.
Locate the loose cables next to the right screen.
Step 1
Cover the cables by inserting them into the slit of the cable sheath. Make sure the slit faces the opposite
Step 2
direction of the right screen.
Figure 1-40
Step 3
Walk to the back of the Cisco TelePresence screen and locate the speakers on each side of the LCD
screen.
Place one grommet of the LCD back cover on the stud on the speaker locating bracket.
Step 4
Note
The back cover is the shaded item in the following illustrations.
Figure 1-41
Placing the LCD Back Cover Onto the Speaker Locating Bracket
OL-23393-01
Placing the Cables into the Cable Sheath
49