Attaching The Feet Bracket And Leveling Feet To The Frame - Cisco TelePresence 3000 Installing And Removing

Attach the grommets from the narrow side first. This side is on the left in
Note
Figure 1-26 Attaching the Fabric Sub- Assembly to the Frame
Pull the edges of the Fabric Sub- Assembly over the edges of the frame on the narrow side.
Step 8
Place the Fabric Sub- Assembly grommets on the frame studs on the narrow side. Overlap two grommets
Step 9
on the studs at the corners of the frame.
Place the grommets on the studs following the outer edge of the screen and frame making sure the
Step 10
bracket holes align with the curves in the Fabric Sub- Assembly.

Attaching the Feet Bracket and Leveling Feet to the Frame

This section describes the steps you perform to attach the Feet Bracket and leveling feet to the frameand
includes the following topics:
•
•
Required Parts and Tools
•
•
•
•
OL-23393-01
Required Parts and Tools, page 33
Attaching the Feet Bracket to the Frame, page 34
6 M4x 20 Pan Head Phillip Screw
3 leveling feet
3 foot brackets
1 #2 Phillips screwdriver
Figure 1-26.
33