Cisco TelePresence 3000 Installing And Removing page 43

Attaching the Brackets to the LCD Display
To prepare the LCD display, complete the following steps.
Clean the working area of dirt and debris.
Step 1
Lay the LCD screen flat on the floor face down on top of clean foam or cardboard to make sure you do
Step 2
not scratch the screen.
Attach the LCD mounting brackets to the rear of the LCD screen using four M8 x 16 mm pan head
Step 3
Phillips screws.
Figure 1-34
OL-23393-01
Attaching the LCD Mounting Brackets to the LCD Screen
43