Assembling The Kick Guards - Cisco TelePresence 3000 Installing And Removing

Assembling the Kick Guards

This section describes the steps you perform to assemble the kick guards and includes the following
topics:
•
•
Required Parts and Tools
•
•
•
•
•
•
Assembling the Kick Guard Subassemblies
To prepare the kick guards, complete the following steps.
Place the right kick guard sub assembly into the slot of the kick guard middle frame guide sub-assembly
and assemble them using M4 x 12 Pan Head Phillip Screws. Follow the same procedure to assemble the
left kick guard sub-assembly with kick guard middle frame sub-assembly. These kick guards attached to
the bottom of the right screen and left screen respectively.
Make sure the curvature of the kick guard sub-assemblies are the same.
26
Assembling the Kick Guards, page 26
Assembling the Kick Guard Subassemblies, page 26
1left kick guard sub-assembly
1 right kick guard sub-assembly
1 kick guard middle frame sub-assembly
1 kick guard middle frame guide sub-assembly
4 M4 x 12 Pan Head Phillip Screw
#2 Phillips screwdriver
OL-23393-01