Attaching The Speakers To The Frame - Cisco TelePresence 3000 Installing And Removing

Tighten the screws.
Step 13
Repeat
Step 14
Turn the leveling feet clockwise to set them to their lowest setting.
Step 15
Do not torque the feet against the bracket. You may need to adjust the height of the leveling feet during
screen installation.
Figure 1-29 Lowering the Leveling Feet
Step 16 Stand the screen upright on the floor.

Attaching the Speakers to the Frame

This section describes the procedure you perform to attach the speaker to the screen and includes the
following topics:
•
•
Required Parts and Tools
•
•
•
•
•
36
Step 12 through Step 4
Required Parts and Tools, page 36
Attaching the Speakers to the Frame, page 37
2 speaker assemblies
2 M4 x 12 screws
8 M6 Shoulder Screw
1 #2 Phillips screwdriver
1 Speaker Bracket with Grommet Sub-Assembly
for the remaining two foot bracket sub-assemblies.
OL-23393-01