Figure 1-39
Adjusting the Screens
Step 17
Tighten the screen up against the display shelves by adjusting the leveling feet with the open-ended
wrench rotating it clockwise.
Make sure the tabletops are level, most importantly the table door. If the tabletops are not level, adjust
Step 18
the leveling feet or move the screen until the tabletops are level.
After completing the final adjustments, make sure the locating brackets are still aligned.
Step 19
Completing the Assembly
This section describes the steps you take to complete the assembly of the screens and display and
includes the following topics:
•
•
Required Parts and Tools
•
•
•
48
Required Parts and Tools, page 48
Completing the Assembly, page 49
1 LCD back cover
1 cable sheath
3 PDUs
OL-23393-01