Cisco TelePresence 3000 Installing And Removing page 32

Attaching the Fabric Sub- Assembly to the Frame
To attach the Fabric Sub- Assembly, complete the following steps.
Step 1 Clean the working area of dirt and debris.
Place the foam sheet down on your working area.
Step 2
Tip You can also use the old screen as a work surface.
Step 3 Put on the gloves that are included with the kit.
Lay the Fabric Sub- Assembly flat on the foam sheet.
Step 4
Figure 1-24 Fabric Sub- Assembly
Lay the left frame on the Fabric Sub- Assembly(front) aligning the outer edges.
Step 5
Figure 1-25 Frame and Fabric Sub- Assembly
Step 6 Align the bracket holes on the frame with their corresponding curves in the Fabric Sub- Assembly.
Step 7 Locate the START THE FABRIC INSTALLATION FROM THIS END label on the narrow side of
the frame.
32
OL-23393-01