Cisco TelePresence 3000 Installing And Removing page 29

Place a M4 x 12 Pan Head Phillip Screw in the hole on the inside edge of the top part of the left center
Step 2
sub-assembly where the guide and slot meet.
You must be on the rear side of the left frame to insert the screw.
Tighten the screw.
Step 3
Repeat
Step 4
Figure 1-21 Connecting the Left and Left-Center Frame Subassemblies—Front View
OL-23393-01
Step 4through step3 for the bottom of the left frame.
29