Unpacking - Cisco TelePresence 3000 Installing And Removing

Unpacking

Your frame is shipped with the necessary materials to install the screen. Carefully unpack and make sure
you have all of the items shown in the inventory list presented in the Material & Tool Contents section.
Materials and Tools
The materials and tools in
make sure you have all the necessary materials and tools.
Table 1 Materials and Tools for Part Number CTS-3X00-UPG
Item No. Description
1 Left Center Sub-Assembly
2 Right Center Sub-Assembly
3 Left Sub-Assembly
4 Kick guard Center Tube with no Frame Guide Sub-Assembly
5 Kick guard Center Tube Sub-Assembly
6 Left-Right kick guard Sub-Assembly
7 Right Sub-Assembly
8 Speaker Locating Bracket
9 Locating Plate
10 Left End Unit Cap
11 Right End Unit Cap
12 Left LCD Mounting Bracket
13 Right LCD Mounting Bracket
14 Hanger Rod
15 Holding Bracket
16 Left Angle Bracket Sub-Assembly
17 Right Angle Bracket Sub-Assembly
18 M6 Shoulder Screw (see
19 M4 x 12 Low Head SHCS (see
20 M4 x 20 SHCS (see
OL-23393-01
Table 1 are provided in the installation package. Use the following table to
Table 2)
Table 2)
Table 2)
Qty Yes No Part Number
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
2 Part of CTS-3X10FACADE
2 Part of CTS-3X10FACADE
4 Part of CTS-3X10FACADE
4 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
1 Part of CTS-3X10FACADE
16 Part of CTS-3X10FACADE
28 Part of CTS-3X10FACADE
18 Part of CTS-3X10FACADE
3