Cisco TelePresence 3000 Installing And Removing page 47

Move the left screen in through the open table door.
Step 9
Locate the spade terminals on the rear of the left and right screens, and locate the speaker cables.
Step 10
Connect the speakers to the speaker cables for the left and right screen.
Step 11
See Figure 15 on page 22
Slide the right screen into place under the display shelf. See
Step 12
Do not unscrew the leveling feet and make sure that the kick guard skirt is behind the screen.
Note
Align the locating brackets on the underside of the table shelf to the locating plates on the right screen.
Step 13
Raise the leveling feet on the screen so that the top edge of the screen is snug with the underside of the
Step 14
display shelves.
Do not tighten the leveling feet as you may need to adjust the placement of the screen.
Note
Figure 1-38
Repeat
Step 15
the other kick guard.
Make sure the kick guard skirt is behind the screen and not under any of the leveling feet.
Note
Adjust the frames so they are equally distant to the LCD screen making sure they are still aligned with
Step 16
the locating plates and at the kick guard.
Tip Move the screens in or out until they are even.
OL-23393-01
for the connection diagram.
Raising the Leveling Feet
Step 12 through Step 14 for the left screen, inserting the guide of one kick guard into the slot of
Figure 1-39 for the approximate placement.
47