6.1
Internal memory read/write
Reading internal memory (GET, GETP instruction)
Type
n1
Slot No. the special module is installed on
Start address of special module's internal memory to
n2
read data
D
Device's start address with saved data to read
n3
Number of words data to read
Difference between GET instruction and GETP instruction
GET: always executed with execution condition On (
•
GETP: executed with execution condition of operation start (
•
Example: If D/A conversion module is installed on base No.0 and slot No.3, and
internal memory address No.0 and 1's data in D/A conversion module is read to D16 and
D17 of CPU module.
Address
D area of CPU Module
D00015
D00016
Run channel setting
Range of output voltag
D00017
e/current
R200
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
September 2010
6. Programming
Description
Honeywell
Area available
Integer
Integer
M, P, K, L, T, C, D, #D
Integer
)
Internal Memory of D/A
Conversion Module
Run channel setting
Range of output voltage/
current
)
Address
0
1
93