Table of Contents
Advertisement
4. Operations and Monitoring
4.2. Configuring parameters
4.2
Configuring parameters
You can specify the isolated D/A conversion module's operating parameters through
SoftMaster's I/O Parameters setting window.
Setting items
Isolated D/A conversion module is used to set parameters and monitor/test the applicable
module using the SoftMaster menu or tool bar, or read/write the data of internal memory
by means of the scan program.
The SoftMasters's I/O Parameter Setting window interface (invoked from the project
window) is used to configure the parameters of isolated D/A conversion module.
The following table lists the functions of the I/O parameters.
Item
I/O parameters
54
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
Details
Specify the following setting items necessary for
the module operation.
Channel status
•
Output range
•
Input type
•
Channel output type
•
Rate control
•
Increase/Decrease limit value
•
Output limit
•
High/Low limit value
•
The user specified data in SoftMaster is saved on
the D/A conversion module when Special Module
Parameters are downloaded. In other words, the
point of time when [Special Module Parameters]
are saved on D/A conversion module has nothing
to do with PLC CPU's status Enable or Disable.
Honeywell
200
September 2010
Advertisement
Table of Contents
