Setting Output Type; Error Code - Honeywell 2MLF-DV4S User Manual

5. Internal Memory Configuration
5.3. Operation parameters settings

Setting output type

Based on setting value, the output status is as follows:

Error code

Error codes detected from D/A conversion module are saved.
Error Code
(Dec)
10
11
12
13
21
31#
32#
40#
88 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
Description
Module error (Reset Check Error)
Module error (Ram Check Error)
Module error (Register Check Error)
2
Module error (E PROM Check Error)
Module error (D/A Conversion Error)
Current module's parameters setting error. Refer to
Attention.
Parameters setting error when setting current module's
Offset/Gain. Refer to Attention.
Setting error of current module's digital input range
Honeywell
LED status
Blinks
every 0.2s.
Blinks
every 1s.
200
September 2010