Table of Contents
Advertisement
5. Internal Memory Configuration
5.2. I/O area of D/A converted data
Channel operation information (Address 1)
1.
This area is used to display the channel being used.
Output setting (Address 2)
1.
Enable/Disable D/A output can be specified for respective channels.
2.
If the output is not specified, the output of all the channels is disabled.
3.
Enable/Disable D/A output is as follows:
Digital input (Address 3~6)
1.
Based on input type, you can select digital value and use within the range of -
192~16191, -8192~8191, 952~5047 or -120~10191 for 1~5V.
2.
If the digital value is not specified, it is set to 0.
84
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
Honeywell
200
September 2010
Advertisement
Table of Contents
