Table of Contents
Advertisement
4. Operations and Monitoring
4.3. Parameter configuration
4.3
Parameter configuration
Configuring parameters
Step
1
Open SoftMaster and create a project. (For details on how to create the
project, refer to the SoftMaster User's Guide)
2
On the Project Window of SoftMaster, double-click I/O parameters.
The I/O Parameters Setting window is displayed.
3
Click the Module area of the applicable slot to select the applicable module.
4
On the I/O Parameter Setting window, select the slot of the base on which
the D/A conversion module is installed.
5
Click the arrow on the Module column to select an applicable module from
the list.
56
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
Action
Honeywell
200
September 2010
Advertisement
Table of Contents
