Honeywell 2MLF-DV4S User Manual page 108

7. Troubleshooting
7.1Diagnosing errors. Diagnosing errors Diagnosing errors
Error Code
(Dec)
53#
54#
55#
ATTENTION
1.
2.
If errors occur:
Error Code
10, 11, 12,
13, 21
31#, 40#,
41#, 60#
32#, 50#,
51#, 52#,
53#, 54#,
55#
108 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
Offset/Gain setting error in voltage module of 0~5V
(Offset value is set greater than or equal to Gain value). Refer to
Attention.
Offset/Gain setting error in voltage module of 0~10V
(Offset value is set greater than or equal to Gain value). Refer to
Attention.
Offset/Gain setting error in voltage module of -10~10V
(Offset value is set greater than or equal to Gain value). Refer to
Attention.
# of the error code stands for the channel with error found.
If 2 or more errors occur, the module will not save other error codes than
the first error code found.
Module
Error Bit Status
Ready
Deleted Set all the
(OFF) channels
Set applicable
Kept
channel only
Kept -
Honeywell
Description
Error Code
Displayed on
system area
Displayed on
system area
Offset/Gain error
code area
LED
status
LED
Blinks every
0.2s.
Blinks every
1s
Blinks every
1s
200
September 2010