Table of Contents
Advertisement
Using an external power module
If an external power supply is used, connect isolated D/A conversion module with
•
DC+24V of the external power supply.
If an external power supply is used, a noise filter is recommended for D/A
•
conversion module side.
See section
•
DC+24V necessary for isolated D/A conversion module.
If a noise filter is
not used
R200
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
September 2010
Specification of power supply,
2MLF-DV4S / 2MLF-DC4S
Honeywell
3. Installation and wiring
3.4. Wiring of DC 24V
for details on power specification of
51
Advertisement
Table of Contents
