Using I/O Parameters - Honeywell 2MLF-DV4S User Manual

Using I/O parameters

Perform the following steps, to configure I/O parameters for 2MLF-DV4S/2MLF-DC4S.
Step
1
Open SoftMaster and create a project. (For details on how to create the
project, refer to the SoftMaster User's Guide)
2
On the Project Window, double-click I/O Parameters.
R200 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
September 2010
4. Operations and Monitoring
Action
Honeywell
4.2. Configuring parameters
55