4.5
Register special module variables
This section describes the automatic registration function of special module variables in
the SoftMaster.
Registering special module variables
Register the variables for each module referring to the special module information that is
set in the I/O parameter. You can modify the variables and comments.
The following procedure describes the automatic registration of the special module
variables.
Step
1
On the I/O Parameter Setting window, select the special module type.
2
On the Project Window, double-click Global Variable/Address.
R200
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
September 2010
4. Operations and Monitoring
4.5. Register special module variables
Action
Honeywell
73