Sony SRS-HG10 Help Manual page 79

*
If a passkey is required, enter "0000."
If [h.ear go 2] does not appear on the screen, repeat the procedure from step
*
A passkey may be called "Passcode," "PIN code," "PIN number" or "Password."
3. When the following screen is displayed, click [Close].
The driver installation for the PC begins.
During the installation, the [
When [ ] disappears, the driver installation has finished. Go to step 4.
Depending on the PC, this installation may take a while. If the driver installation takes a long time, the speaker
enters the BLUETOOTH/Network standby mode automatically. In this case, turn on the speaker again.
Right-click [h.ear go 2] of [Device], and then select [Sound settings] from the displayed menu.
4.
] mark is displayed on the bottom left of the [h.ear go 2] icon.
79
.