Sony SRS-HG10 Help Manual page 62

Check that the
4
On the connecting equipment, start playback and adjust the volume.
5
For more details, refer to the operating instructions of the connecting equipment.
Changing R (right) and L (left) of rear speakers
When using the Wireless Surround function, press the SET UP button on the rear of the speaker repeatedly. Each press
switches between R (right) and L (left). This operation is possible with either speaker.
Canceling the Wireless Surround function/using other functions
While using the Wireless Surround function, other functions (such as the Wireless Multi-room function, Wireless Stereo
function, Speaker Add function, BLUETOOTH connection) are not available.
Press and hold the SET UP button on this speaker until a beep is heard.
The (right)/ (left) indicators turn off and the Wireless Surround function is canceled. Then, the grouping is also
canceled.
Hint
When connecting two speakers to the AC outlet using the USB AC adaptors, the power of the connected equipment and two
speakers can be linked by turning on or off the equipment or speaker (Power Interlock).
You can also set the Wireless Surround function using "Sony | Music Center".
You cannot cancel the Wireless Surround function by using "Sony | Music Center." For operation on the speaker, see "Canceling
the Wireless Surround function/using other functions" noted above.
(right)/ (left) indicators on these speakers light up.
62