Sony SRS-HG10 Help Manual page 11

16.
AUDIO IN jack
Connect to the headphone jack of a portable audio devices, etc., using a commercially-available audio cable (with
stereo mini plugs/no resistance).
17.
USB port
Connect to a PC or High-Resolution Audio compatible WALKMAN
18.
DC IN 5V jack
19.
(right)/ (left) indicator
Lights up when Speaker Add function, Wireless Surround function
20.
STEREO PAIR button
Press to use Speaker Add function or Wireless Stereo function
21.
SET UP button
Press to use Stereo Mode function with two speakers or to use Wireless Surround function
speaker with other audio devices.
22.
UPDATE button with indicator/WPS button
Indicates the status of the speaker's software update. After pressing and holding for 2 seconds when the indicator
is lit, the speaker beeps and the software update starts.
If your wireless router has a Wi-Fi Protected Setup™ (WPS) button, you can use this button to connect to the
*2
network .
If your wireless router has an AOSS button, it can be used as a Wi-Fi Protected Setup™ (WPS) button. For
details, refer to the operating instructions supplied with your wireless router.
*1
For more details, refer to the following URL.
http://sony.net/nasite
*2 Not available while the UPDATE indicator is lit
Related Topic
About the indicators
Using this speaker as a rear speaker (Wireless Surround)
Connecting two speakers (Wireless Stereo)
Connecting two speakers (Speaker Add function)
4-735-503-11(1) Copyright 2018 Sony Corporation
11
®
or Xperia.
*1
or Wireless Stereo function
*1
with two speakers.
*1
is used.
*1
by combining the