Sony SRS-HG10 Help Manual page 55

The connection is established.
If the LINK indicator flashes in red
The speaker failed to connect to the Wi-Fi network. Try connecting again from step
Hint
For details on the Wi-Fi Protected Setup (WPS) button of your wireless router, refer to the operating instructions of your wireless
router.
If your wireless router has an AOSS button, it is possible to use it as Wi-Fi Protected Setup (WPS) button. For details, refer to the
operating instructions supplied with your wireless router.
If the Wi-Fi connection fails even if you try several times, initialize the speaker and delete the setting information of the Wi-Fi
connection, then try connecting again.
Note
When you connect the speaker to a Wi-Fi network for the first time after purchase, or after you initialize the speaker, the
BLUETOOTH/Network standby mode is turned on automatically.
Related Topic
Using the BLUETOOTH
Updating the pre-installed software
Initializing the speaker
®
/Network standby mode
4-735-503-11(1) Copyright 2018 Sony Corporation
55
.