Sony SRS-HG10 Help Manual page 61

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)
Using this speaker as a rear speaker (Wireless Surround)
You can enjoy surround sound by combining with products that support the Wireless Surround function.
A Sony product (such as a sound bar/home theater system) that supports the Wireless Surround function and two h.ear
go 2 (SRS-HG10) are required.
For more information including compatible models, refer to the following URL.
http://sony.net/nasite/
Preparing for using the Wireless Surround function
Connect the speakers ( h.ear go 2 (SRS-HG10) ) to the wireless network.
For details about the wireless network connection, see
Check if the software of these speakers are the latest version.
For details how to check the software version, see
Setting speakers to use as rear speakers (Wireless Surround function)
Place the speakers at a distance 1 m (3 ft) or less from each other, and then turn on them.
1
The (power) indicator lights up in green.
On each speaker, press the FUNCTION button repeatedly until the NETWORK indicator lights up.
2
Both speakers enter the NETWORK mode.
Set up the Wireless Surround function on the connecting equipment.
3
Follow the instructions on the screen. The following operations use a sound bar (HT-NT5) as an example.
1.
Press the HOME button on the remote control.
2.
Select [Setup], and then press the enter button.
3.
Select [Wireless Surround], and then follow the instructions on the screen.
For more details, refer to the operating instructions of the connecting equipment.
"Selecting the Wi-Fi network connection
"Searching the latest software via a network
61
method."
connection."