Sony SRS-HG10 Help Manual page 175

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)
Searching the latest software via a network connection
The speaker has a function which updates the latest software automatically via a Wi-Fi network.
When the latest software is released and the speaker searches it, the UPDATE indicator lights up in orange.
To avoid the network trouble by many accessing the network server, the searching timing is differ to each speaker. You
can also check manually if the latest software is released.
This section explains how to check the latest software releasing manually.
Do the following before starting.
The speaker is connected to the AC outlet with the supplied USB AC adapter.
(Software updates cannot be performed when using with the built-in rechargeable battery.)
Check that the speaker is connected to a Wi-Fi network.
Check that the LINK indicator lights up in orange.
When using the Wireless Surround function or Wireless Stereo function, cancel the group.
Check that the UPDATE indicator lights off.
If the indicator lights up in orange, the speaker has already searched the latest software, and you cannot operate the
following procedure. Start updating the software.
Press the UPDATE/WPS button on the rear of the speaker.
1
The UPDATE indicator flashes in orange
the latest software is released.
Check the UPDATE indicator as followings.
2
Lights off: The software of this speaker is the latest version.
Lights up in orange: The latest software is released.
If you set the function, which updates the speaker software automatically, to enable by "Sony | Music Center,"
the speaker will update the software while you are not using the speaker, such as midnight or when the speaker
is in the BLUETOOTH/Network standby mode.
When you update the software immediately, proceed to
When updating starts, the playback is stopped and the BLUETOOTH connection is disconnected.
When the UPDATE indicator lights up in orange, press and hold the UPDATE/WPS button until the beep
3
sound is heard.
When updating starts, the UPDATE indicator flashes in orange.
While updating, the speaker cannot be operated.
*1
, the NETWORK indicator lights up, and the speaker starts searching if
and update manually.
175