Sony SRS-HG10 Help Manual page 73

When you turn on the speaker for the first time after purchase, pairing information is not stored in the speaker.
In this case, by only placing the speaker in the BLUETOOTH mode, the BLUETOOTH indicator will begin to
flash quickly (three times a second) and the speaker will enter the pairing mode automatically. Then go to step
.
When you turn on the BLUETOOTH mode, the speaker will try to make a BLUETOOTH connection with the last
connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection establishes automatically
and the BLUETOOTH indicator stays lit. In this case, turn off the BLUETOOTH function on the BLUETOOTH
device, or turn off the BLUETOOTH device.
Set the speaker to the pairing mode.
4
Press and hold the EXTRA BASS button with indicator/
the BLUETOOTH indicator starts flashing quickly (three times a second).
Search for the speaker on the PC.
5
Select [Connect] in the [
1.
Select [h.ear go 2].
2.
Action Center] on the right-bottom of the screen.
73
PAIRING button until the voice guidance is heard and