Terminating The Bluetooth Connection (After Use) - Sony SRS-HG10 Help Manual

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)

Terminating the BLUETOOTH connection (After use)

When you finish playing music with the BLUETOOTH device, perform any of the following operations to terminate the
BLUETOOTH connection.
Turn off the BLUETOOTH function on the BLUETOOTH device. For details, refer to the operating instructions
supplied with the device.
Turn off the BLUETOOTH device.
Turn off the speaker.
Touch the paired device to N-Mark of the speaker again (for the NFC-compatible device).
Hint
If no operation is performed and no music (sound) is input by a BLUETOOTH device for about 15 minutes, the speaker enters the
BLUETOOTH/Network standby mode automatically by the auto power off (auto standby) mode, then the BLUETOOTH
connection terminates. If the speaker is in the BLUETOOTH connection by HFP, it is not automatically disconnected.
When you finish playing music, the BLUETOOTH connection may terminate automatically, depending on the BLUETOOTH
device.
Pairing information is not deleted when the BLUETOOTH connection is terminated.
Related Topic
Auto Power Off (Auto Standby) mode
4-735-503-11(1) Copyright 2018 Sony Corporation
135