Sony SRS-HG10 Help Manual page 177

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)
Checking the Wi-Fi signal strength (reception sensitivity)
The indicator of the speaker shows signal strength (reception sensitivity) by its lit status when the speaker is connected
to a Wi-Fi network and is turned on.
While the speaker is connected to a Wi-Fi network (the LINK indicator lights up in orange), turn on the
1
speaker, and then press and hold the + (volume) button and UPDATE/WPS button.
The function indicators (NETWORK, BLUETOOTH, USB, AUDIO IN) on the top panel start to light up.
The number of indicators lit shows the strength of the signal.
When any button is pressed, the signal's strength indication is canceled.
When no indicator is lit, the signal strength is the weakest. When four indicators are lit, the signal strength is the
strongest.
To receive a stronger signal
Try the following:
Change the orientation/location.
Turn off other wireless devices.
177