Sony SRS-HG10 Help Manual page 195

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)
The power indicator flashes in red
The speaker is in the protect mode, or the software update has failed. Check the following:
The UPDATE indicator continues flashing in orange.
The software update has failed. Turn off the speaker, then turn it on again. The update will resume. If the situation
is not improved after switching the speaker off and on, consult your nearest Sony dealer.
None of the buttons can be operated, and the speaker does not turn off even if the
The speaker may be in the protect mode. Press and hold the
seconds to reset the speaker. If the
shop from which you purchased this speaker.
Related Topic
Charging the battery
Any button on the speaker cannot be operated
Updating the pre-installed software
(power) indicator keeps flashing, consult your nearest Sony dealer or the
4-735-503-11(1) Copyright 2018 Sony Corporation
195
(power) button is pressed.
(power) button of the speaker more than 8