Sony SRS-HG10 Help Manual page 58

When the Wi-Fi connection is completed, the LINK indicator lights up in orange. It may take more than a minute for
the LINK indicator to light up.
Connection is completed.
Connect the PC to the wireless router to be used.
9
Hint
If you want to set a fixed IP address, set in the screen in step
When the connection of the speaker to your Wi-Fi network has completed, connect your PC to the previous destination or your
wireless router.
Note
This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from step
Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after setting the Wi-Fi
security.
When you connect the speaker to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby mode is
turned on automatically.
above.
4-735-503-11(1) Copyright 2018 Sony Corporation
58
.