Sony SRS-HG10 Help Manual page 105

While using the Speaker Add function, other functions (such as the Wireless Multi-room function, Wireless Stereo
function, Wireless Surround function) are not available.
To cancel the Speaker Add function, press and hold the STEREO PAIR button on the rear of one of the speakers until
beeps are heard, which informs you to cancel the function.
The (right) / (left) indicators turn off, and the Speaker Add function is canceled. Then, the grouping is also
canceled.
Hint
When making or receiving a call, only operate the speaker where the BLUETOOTH indicator lights up.
The power of both speakers can be turned off by operating one of the speakers (Power Interlock).
The Speaker Add function will not be terminated even if the speaker is turned off. When the speaker is turned on, the speaker will
try to establish the Speaker Add function with the other speaker that had been connected. If you want to use the Speaker Add
function again, turn on the other speaker within 1 minute.
If you want to use the speaker that had been used as one of the speakers of the Speaker Add function by itself, press the
(power) button to turn on the speaker, then press and hold the STEREO PAIR button until beeps are heard to terminate the
Speaker Add function. Do the same operation on the other speaker to terminate the Speaker Add function.
Note
Viewing videos using the Speaker Add function is not recommended. A slight deviation occurs between video and audio.
When using the Speaker Add function, the automatic software update feature of the speakers is not activated. To update the
software, cancel the Speaker Add function, and then connect the speaker to the wireless network.
When using the Speaker Add function, the speaker cannot be used with a network connection. To use a network connection,
cancel the Speaker Add function.
It is recommended to turn down the volume of the speakers before setting the Speaker Add function. The two speakers output
sound for the Speaker Add function, so a louder sound may be output than that with playback with one speaker.
If you use a smartphone with Android 5.0 or later installed, you can set the Speaker Add function using "Sony | Music Center."
Use "Sony | Music Center" with the latest version. For more details on "Sony | Music Center," refer to the following URL.
http://www.sony.net/smcqa/
Related Topic
Listening with multiple speakers (Wireless Multi-room, Wireless Surround, Wireless Stereo)
Using this speaker as a rear speaker (Wireless Surround)
Connecting two speakers (Wireless Stereo)
Switching between double mode and stereo mode (Speaker Add function)
4-735-503-11(1) Copyright 2018 Sony Corporation
105