Sony SRS-HG10 Help Manual page 134

Pull the lever on the bottom of the speaker in the direction of the arrow shown in the illustration below to remove the
*
grille.
*
After removing the speaker grille, do not touch the exposed part of the speaker (speaker units), and keep the removed grille on a flat surface to
prevent distortion.
Hint
After "Sony | Music Center" is downloaded and installed to your smartphone, iPhone, etc., you can use your smartphone, iPhone,
etc. as a remote control to operate devices connected to the speaker.
Depending on the BLUETOOTH device, it may be necessary to adjust the volume or set the audio output setting on the
connected device.
Using "Sony | Music Center" allows you to configure convenient settings.
For details, see "Installing "Sony | Music
Note
Stop playback on the BLUETOOTH device and turn down the volume of the device beforehand. When pairing is completed, loud
sound may output from the speaker. Otherwise, you may experience sudden loud sound from the speaker when music is played
back for the first time after pairing.
If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operation on the speaker.
Related Topic
Selecting the BLUETOOTH audio streaming playback quality (Codec)
Terminating the BLUETOOTH connection (After use)
Installing "Sony | Music Center"
Center"."
4-735-503-11(1) Copyright 2018 Sony Corporation
134