Sony SRS-HG10 Help Manual page 64

Help Guide
Wireless Speaker
h.ear go 2 (SRS-HG10)
Connecting two speakers (Wireless Stereo)
By connecting two h.ear go 2 (SRS-HG10) , you can enjoy more expanding stereo sound.
Two h.ear go 2 (SRS-HG10) are required.
Preparing for the Wireless Stereo function
Connect the speakers ( h.ear go 2 (SRS-HG10) ) to the wireless network. For details about the wireless network
connection, see "Selecting the Wi-Fi network connection
Check if the software of these speakers are the latest version. For details how to check the software version, see
"Searching the latest software via a network
You can only enjoy the Wireless Stereo function on a wireless network. This function is not available with a
BLUETOOTH connection. To use the BLUETOOTH connection, use the Speaker Add function.
For details, see "Connecting two speakers (Speaker Add
Connecting two speakers (Wireless Stereo function)
Place the speakers at a distance 1 m (3 ft) or less from each other, and then turn on them.
1
The (power) indicator lights up in green.
On each speaker, press the FUNCTION button repeatedly until the NETWORK indicator lights up.
2
Both speakers enter the NETWORK mode.
Press and hold the STEREO PAIR button on the rear of one of the speakers until beeps are heard, which
3
informs you to start setting the function.
The (right)/
Press and hold the SET UP button on the rear of the other speaker until beeps are heard, which informs
4
you to start the connection.
Do this operation within 30 seconds from pressing the STEREO PAIR button on the previous step.
Beeps sound on each speaker to inform which speaker is set to the left or right position, and the two speakers are
connected with the Wireless Stereo function.
connection."
(left) indicators flash.
method."
function)."
64