A.6.6 Power Fail Recovery - GE PANDA Service Manual

A.6.5 Masimo SpO
Masimo SET 1 Cables
RD SET GE-05, PATIENT CABLE, 1.5M/5 FT
RD SET GE-12, PATIENT CABLE, 3.6M/12 FT
Masimo SET 2 Cables
RD SET MD20-05, PATIENT CABLE, 1.5M/5 FT
RD SET MD20-12, PATIENT CABLE, 3.6M/12 FT
Masimo Probes for both Masimo SET 1 and Masimo SET 2
RD SET NEO, ADHESIVE SENSOR, BOX 20
RD SET NEO PT, ADHESIVE SENSOR, BOX 20
Masimo Tape Description
RD SET INF REPLACEMENT TAPES, BOX 102
RD SET NEO REPLACEMENT TAPES, BOX 102
RD SET NEO PT REPLACEMENT WRAPS, BOX 10
Note: The preceding list of accessories is provided for reference only, and is not a complete list of
compatible Masimo sensors. Use only RDSet, LNOP, or LNCS Masimo oximetry sensors for SpO
measurements.

A.6.6 Power Fail Recovery

When recovering from a loss of mains power during normal use, the warmer will return to operation using
previous SpO
10 minutes, a normal power on sequence will occur instead of a mains power failure recovery.
Service Manual
Cables and Probes
2
settings within 30s from return of mains power. If mains power was removed for longer than
2
Appendix A: Specifications
SpO2 Specifications
GE Part Number
MASIMO-RD-4084
MASIMO-RD-4085
GE Part Number
MASIMO-RD-4103
MASIMO-RD-4104
GE Part Number
MASIMO-RD-4003
MASIMO-RD-4004
GE Part Number
MASIMO-RD-4046
MASIMO-RD-4047
MASIMO-RD-4048
2
A-7