Controls And Displays - GE PANDA Service Manual

1.1.2 Controls and Displays

Feature
Number
1
2
3
4
5
6
7
8
9
10
11-12
13
Service Manual
Power stand-by switch - On the left below the display turns the power to the warmer on
and off.
SpO logo (optional) - Indicates which SpO
2
Masimo SET (1 or 2)
Oximetry key (optional) - This key retains the same function at all times and toggles SpO
on and off.
Mode key - To select manual or baby mode. This key retains the same function at all times
Temperature/power increase/decrease key - This key retains the same function at all
times
Baby temperature - Can be displayed in degrees Celsius or degrees Fahrenheit. The default
setting is degrees Celsius.
Alarm silence key - Alarms can be silenced by pushing the key above the display or by a
wave of your hand directly in front of the alarm light.
Help key - The key with the "?" in the upper right corner brings up the help screen that
explains alarms and functions.
Task keys - The five keys on the right are "soft" keys that change their function depending
on what task you wish to perform. They control equipment settings and options.
Dimmer knob - Controls the brightness of the observation lights.
Date and time - Displayed at the bottom of the screen.
Moving arrow - indicates that the processor is active
Chapter 1: Functional Description
Description
system is installed:
2
Nellcor
Introduction
2
1-7