Scale Calibration - GE PANDA Service Manual

Chapter 4: Troubleshooting
Service Mode
** The Low saturation limit can be set only between 20 and the High saturation limit –1.
The High saturation limit can be set only between the Low saturation limit +1 and 100.
The Operation Settings menu screen appears as follows:

4.1.5 Scale Calibration

This menu displays the Scale Recalibration Count (SR) and Corrected value (SC). It also displays Scale
software revision, model, resolution code and POST (power on self test) results.
Note: For versions of Application Software 1.0.9 and earlier SR represents Scale Raw Value.
Menu selections:
• Manual Cal (refer to
• Check Weight. Used to verify the correct weight is reported once calibration is complete.
4-4
"3 Calibration" for details).
Service Manual