F7 And F8 Fuse Replacement Instructions; Maneuvering Handle - GE PANDA Service Manual

5.4.8 F7 and F8 Fuse Replacement Instructions

Fuse F7 and F8 are replaceable however the socket contacts are brass and extremely easy to bend causing
a loose connection when the new fuse is installed. Do not pry them out use needle nose pliers and pull
straight out. Reinsert gingerly the same way. Once damaged the socket can not be replaced in the field and
a new Power Bd will need to be installed. Refer to

5.4.9 Maneuvering Handle

Use a 13 mm wrench to remove the 2 nuts, split ring washers and flat washers from the mounting studs.
Slide the studs out the bottom of the dovetail rail.
Service Manual
F7 F8
Chapter 6 for fuse ordering information.
Chapter 5: Repair Procedures
Electronic Enclosure Repairs
5-15