Pc Command Line Interface Sub-Menus - GE PANDA Service Manual

4.2.3 PC Command Line Interface Sub-Menus

4.2.3.1 Version
Version has no help submenu.
4.2.3.2 getbuttons
command: getbuttons
arguments: none
function:
Returns the current state (released or pushed) of the touch panel push buttons. The buttons are
numbered from 1 to 11, starting with the alarm silence button and progressing counter-clockwise. For
example, button1 = alarm silence, button5 = lower left button, button6 = ? button, and button11 = lower
right button.
usage: getbuttons
4.2.3.3 update
Note: Update instructions, command variables, and materials will be provided with the update package.
Caution: Do not run the update command unless specifically instructed to do so.
command: update
arguments:
'proc' = processor to update
audio - audio processor
heat - heat control processor
'filesz' = size of the file to upload
'crc' = crc of the file to upload
function:
Updates the specified processor with the file provided via xmodem upload. After issuing this command,
the user will be prompted to send the update file via xmodem transfer. Once the file transfer is
complete, the crc is checked to ensure data integrity; then the processor update (re-programming)
process will begin. The touch panel buttons will be disabled while caring out the functions of this
command.
Caution: A failed exit status of this command after commencement of processor re-
programming may leave the system in an unknown state. If this happens, the
command should be run again until successful, or the warmer should be placed out
of service and technical support contacted.
usage: update proc filesz crc
Service Manual
Chapter 4: Troubleshooting
PC Command Line Interface
4-15