Pc Command Line Interface Main Menu - GE PANDA Service Manual

Chapter 4: Troubleshooting
PC Command Line Interface
Stop bits 1
Flow control None
Click OK
6. Boot Warmer into Service Mode SW if not already.
7. Press enter on your computer.

4.2.2 PC Command Line Interface Main Menu

To view available menu selections, type help at the command prompt.
help
version
getbuttons
update
logs
pulsetone
ncas
dips
heateng
lang
lcd
Note: NCAS is an early acronym for Hands Free Alarm Silence.
Note: For help on a particular command, type '<command> help'. For example, to get help on the logs
command, type 'logs help'
4-14
- print this help text
- print service mode version info
- print status of pushbuttons
- update firmware
- retrieve stored logs
- play single pulsetone / set vol.
- print ncas input state
- print ctrl brd dipswitch states
- perform heat engine tests
- list/set available languages
- display multi-color test pattern
Service Manual