Identify C300 Controller Components; Table 2 Series C Hardware Components - Honeywell Experion C300 User Manual

Series A I/O Module
DeviceNet Interface (supported by CCL)

Identify C300 Controller components

Table 2 identifies the C300 Controller components and its associated components. The
C300 Controller supports non-redundant and fully redundant operation. Redundancy is
built in to the controller, so that just adding another controller and a redundancy cable; a
redundant controller pair is achieved. Note that the 'CC' designation on the model
number indicates the printed wiring boards are conformally coated for additional
protection from the environment, (CU = uncoated).
Series C
Component
C300 Controller
Module
C300 Controller
Input Output
Termination
Assembly (IOTA)
9 Port FTE
Control Firewall
Module
9 Port Control
Firewall IOTA
R301.1
11/06
I/O modules supported by the C300 Controller

Table 2 Series C Hardware components

Description
A distributed process controller and I/O
gateway for the Experion system. Module
contains printed circuit assemblies, status
indicators and a display, inside in a plastic
housing. Module mounts to its Input
Output Termination Assembly (IOTA).
Provides the connection point for the
C300 Controller module and all cable
terminations to the controller, (FTE,
IOLink, Redundancy, Battery and Time
Source cable terminations). Provides 24
Vdc power distribution to the controller
module.
Note: The C300 Controller IOTA supports
only one controller module.
Provides FTE distribution to in-cabinet
network nodes, (other C300 Controllers
and Series C FIMs)
Provides connection for eight FTE cables
from in-cabinet controllers and Series C
th
FIMs. The 9 port provides an uplink to
the FTE supervisory network. Provides 24
Vdc power distribution to the control
Experion C300 Controller User's Guide
Honeywell
Identify C300 Controller components
Model Conformally Coated
Model Number
1756-DNB
Model Number
CC-PCNT01
CU-PCNT01
CC-TCNT01
CU-TCNT01
CC-PCF901
CU-PCF901
CC-TCF901
CU-TCF901
13